Slide7.jpg
SkidSteer_IMG2.jpg
PDF Print E-mail

Hydraulic or PTO Powered Models

5400AR/6600AR

  • Commercial Duty Snowblowers built to cut through hard compacted snow and ice.
  • Increased capacity, more durable and less moving parts then cross-auger machines.
  • Set-up with a 3-point hitch and PTO or Skid Steer Plate and hydraulically driven.
  • Aggressive dual fan design
  • Easy access to shear bolts located on the front of each fan
  • Adjustable and replaceable skid shoes
  • Bolt-on cutting edges
  • Commercial duty pilot flange bearings
  • All drive chains are enclosed and run in oil for years of service
  • No gearbox - direct drive
 

Standard Equipment and Specifications

Model:

4400AR

5400AR

6600AR

7600ARM


Cutting Width
51"
61"
74"
86"
Cutting Height
30"
30"
36"
42"
Cutting Edge
1/2" x 3"
1/2" x 3" 1/2" x 3" 1/2" x 3"
Snowblower Shell
12 Ga. 12 Ga. 12 Ga. 10 Ga.
Skid Shoes
Adjustable Adjustable Adjustable Adjustable
Fan Diameter
23 Inches 28 Inches 35 Inches 41 Inches
Fan Blades
4 4 6 6
Fan Shafts
1-3/4" 1-3/4" 1-15/16" 1-15/16"
Fan Shafts and Bearings
1-3/4" 1-3/4" 1-15/16" 1-15/16"
Drive System
Direct Chain
Direct Chain Direct Chain Direct Chain
Drive Chain
60 (Oil Bath) 60 (Oil Bath) 60 (Oil Bath) 80 (Oil Bath)
Chute Rotation
280 Deg. 280 Deg. 280 Deg. 275 Deg.
Chute Deflector
Hyd. Hyd. Hyd. Hyd.
Chute Diameter
10 Inches 10 Inches 10 Inches 14 Inches
Hitch Choices
Cat. (I) 3-Point. (Std.)
Universal Skid Steer - Optional
Cat. (I) 3-Point. (Std.)
Universal Skid Steer - Optional
Cat. (I) 3-Point. (Std.)
Universal Skid Steer - Optional
Cat. (II) 3-Point. (Std.)
Universal Skid Steer - Optional
Maximum Pressure (Hydraulic Driven)
4000 PSI 4000 PSI 4000 PSI 4000 PSI
Horesepower Rating
30 - 60 HP 30 - 80 HP 30 - 80 HP 60 - 120 HP
Weight (Approx.)
Base: 1,050 lbs.
Skid Steer: 1,250 lbs.
Base: 1,150 lbs.
Skid Steer: 1,350 lbs.
Base: 1,475 lbs.
Skid Steer: 1,675 lbs.
Base: 2,250 lbs.
Skid Steer: 2,450 lbs.
Optional: Hood Extension and Side Extension Available for Added Width.
Note: SNOWBLAST by Teamco reserves the right to change the above specifications at its own discretion.

Copyright © 2018 teamco. All Rights Reserved.
Joomla! is Free Software released under the GNU/GPL License.
Website by iDesign